Made-to-measure bifold door wardrobes in Nerja
Wardrobes with bifold doors in Nerja are ideal if you want to see and reach almost everything inside in one go. The panels fold concertina-style, like the pages of a book, and leave a much wider opening than sliding doors do. In return, they need a little clear space in front. Here's how bifold doors work, when they're worth choosing and what to measure before you order them.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
How a bifold front folds away
A bifold door is made up of several panels joined together by vertical hinges. The first panel pivots on one side of the wardrobe and pulls the others with it, folding them against each other while a carriage glides along a top track. When you open it, the doors gather into a slim stack at one side, or at both sides if the wardrobe is wide and splits into two groups.
That movement explains almost everything else. Bifold panels don't slide in front of another panel, as they do with sliding doors, so the opening you get is genuinely the width you see. A 240 cm wardrobe with two groups of bifold panels can leave around 200 cm clear, something impossible with two overlapping sliding doors.
When it makes sense to open up a large part of the wardrobe
Bifold doors work well when you use the wardrobe as a whole: you see the suits, dresses, shoes and boxes at once and choose without opening and closing several doors. They also help with wardrobes that have long hanging rails, because you can reach any point without a panel covering the neighbouring section.
They're a good answer for a bedroom in Nerja where the wall is long but the wardrobe needs to look discreet, and for alcoves with a single-span fitted wardrobe. If you'd rather open just the part you need with minimal effort, sliding doors are still more convenient; we look at that difference case by case.

Space in front of and beside the panels
The key question isn't how wide the wardrobe is but how much space is left in front of it. As they fold, each group of panels swings out into the room by roughly the width of two panels, and that margin needs to be clear when you open them. A bed, a bench at the foot of it or a pouffe pushed up against the wardrobe will stop the doors moving.
That's why, besides the width and height, we measure the distance to the nearest piece of furniture, the position of the bedroom door and the direction it opens. At the sides, the folded stack matters too: a partition wall, a radiator or a door frame right next to the wardrobe may mean the group of panels needs to fold towards the opposite side.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Number, width and weight of the panels
- 01
A bifold front is divided into panels of a set width, usually between 30 and 45 centimetres each. The more panels there are, the narrower and lighter each one is to handle, and the less it sticks out from the wardrobe when opened, but there are more hinges and more vertical lines visible on the front.
- 02
Weight is a limit too. A mirror, a solid wood panel or a thick board puts load on the top track, and each system has a maximum weight per door. We choose the hardware according to the size and material of the bifold doors, not the other way round, so they glide smoothly and don't sag or scrape the floor over the years.
Compatibility with drawers and shelves
Bifold doors go well with hanging rails and shelves, but you need to be careful with drawers. When the front folds, the stack of panels takes up a few centimetres of the space in front of the interior, so a drawer right next to that area could clash with it. The usual solution is to set the drawers back or place them in the central section, where the panels have already moved aside.
We can also combine the two: bifold doors over the hanging area and a column of external drawers, with their own front, alongside. Before manufacturing, we draw the full opening to check that no drawer, shelf or handle crosses the path of the panels.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Hardware, adjustments and maintenance
The system relies on two parts worth looking after: the top track and the hinges between panels. With simple maintenance, dusting the track from time to time and checking that the screws are tight, a bifold door keeps running smoothly. Good-quality hardware allows fine adjustment of height and alignment if the floor or wall is slightly out of true.
It's worth knowing that a bifold door has more moving parts than a hinged one, so maintenance is a little greater. That's why we recommend fitting the carriages with the right tolerance and leaving access to adjust them. In a home in Nerja with damp air close to the sea, it's worth choosing hardware designed to resist corrosion.

Ask us to come and measure up in Nerja
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
How they differ from sliding and hinged doors
Compared with sliding doors, a bifold front opens wider and shows you the whole interior, but it needs space in front of the wardrobe and has more visible joints. Compared with hinged doors, it needs far less clearance, because the panels don't swing through a full arc, and it's easier to use in narrow rooms.
If the bedroom is spacious and you want full access without any fuss, standard hinges may be enough. If the space is narrow and there's no room in front, sliding doors are still the most practical choice. Bifold doors sit in the middle: they make use of almost the full width of the wardrobe and need only moderate clearance. To decide using real figures, you can compare the options against your own measurements in the configurator.
What affects the price of a bifold system in Nerja
- 01
The cost of a bifold front depends on just a few clear variables. The first is the number of panels and hinges, because each one adds hardware and adjustment labour. The second is the material of the panels: lacquered, melamine or mirror don't weigh or cost the same. The third is the quality of the track hardware, which determines how long the movement stays smooth.
- 02
To find out what it would cost in your case, prepare your design in the configurator with the measurements of the space and the team will send you an indicative figure. Then the measuring visit is arranged, which costs €50 only if you don't go ahead with the wardrobe, and manufacturing takes around two to three weeks on average. Installation is agreed separately.
Enquiry
Tell us about your project in Nerja
- 1We read your message and look at your photos.
- 2We reply on WhatsApp with a first figure.
- 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.
We don't cut a single board until you've approved the design and the price.
Questions
Frequently asked questions about wardrobes in Nerja
After installation: warranty and care for your wardrobe.
How much clear space do I need in front of a bifold door?
Yes, but less than with a hinged door. The panels gather into a slim stack and swing out into the room by roughly the width of two panels. You need to keep that strip in front of the wardrobe clear.
Is any part of the interior hidden when the front is open?
You can see almost everything, because the stack of panels sits to one side and frees up the rest of the width. Only a small strip next to the side panel stays covered by the folded doors. In very wide wardrobes, the bifold front is split into two groups so the central area stays clear.
Can I have drawers behind the folded doors?
It's possible if the path of the panels is carefully planned. The folded stack takes up a few centimetres, so the drawers are set back or placed in the central section. We draw the opening before manufacturing to avoid any rubbing.
Why do some fronts have four panels and others six?
It depends on the total width of the wardrobe, the weight of each panel and the look you prefer. More bifold panels mean narrower, lighter doors, but also more vertical lines and more hinges. The aim is a balance between convenience and a clean look.
Are they a good option for a small bedroom in Nerja?
They depend on the free space in front, not on the overall size of the room. If there's a clear walkway in front of the wardrobe, bifold doors make better use of the width than sliding doors. If that walkway isn't there, a different type of door will suit better.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

